Nobel Biocare Replace® Implant Internal Titanium Premill Blank 10mm Engaging
NP 3.5mm/ RP 4.3mm/ WP 5.0mm / SW 6.0mm
Ti 6AI-4V ELI (Supply from Germany)
* Simply efficiency
* Precision machined up to ± 5µm
* Benefit from a faster and controlled turnaround time
* Different diameter available of 10mm, 14mm
Pre-milled Abutment Blanks, you can now produce titanium customised abutments with your milling equipment.
Boost your efficiency by using your milling machines and benefit from all major implant connections.
Approved by CE, ISO 9001, ISO 13485
* We also can provide another 3 type of premill as above picture shown. Welcome to further inquire. Thanks.
Points of NobelReplace™ Implant:
NobelReplace™ implants are offered in two body geometries, parallel (Fig.13, left) and tapered (Fig.13, right). Both geometries surface treated area extends uniformly from the edge of the implant/abutment platform to the apical and a diminishing thread depth towards the apical of the implant. A small secondary groove is fashioned underneath the main V shaped threads to enhance initial stability. The tapered version is machined without cutting flutes (Fig.16) at the apical portion while the parallel version is produced with cutting flutes (Fig.14) . All four platform diameter tapered implants are available in four advertised lengths of 8,
10, 13 and 16mm. Although each tapered implant is actually 0.6mm longer than advertised. 3.5mm platform parallel wall geometry implants are produced in four (10, 11.5, 13, 15mm) lengths while all other platform diameter implants are offered in one additional length of 18mm. Although each parallel implant is actually 0.6mm longer than advertised. There are no parallel wall 6.0mm platform diameter implants available.