RN 4.8mm WN 6.5mm Prefabricated Angled Implant Abutment
ITI Straumann Tissue Level Synocta® Titanium Angled Abutment
RN 4.8mm/ WN 6.5mm -- 15°/25° Degree
This angled abutment comes with a screw that takes the Straumann® Torx driver
This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)
Ti 6AI-4V ELI (Supply from Germany)
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom interface
Approved by CE, ISO 9001, ISO 13485
ITI Straumann Tissue Level Synocta® Titanium Angled Abutment are prefabricated, screw-retained intraoral abutments intended to be connected directly to an endosseous implant for retention of a cemented dental prosthesis. They may be indicated for single- and multiple-tooth restorations. Titanium esthetic abutments are precisely machined from titanium alloy and packaged NON-STERILE. They are attached to the implant fixture with a titanium screw. Unlike the circular emergence profile of standard stock abutments, esthetic abutments are manufactured with a tapered emergence profile for more natural-looking contouring of the soft tissue at the implant site. Each esthetic abutment is specific to the restorative platform of the seated implant, and anatomically designed for the connection site’s region on the ridge (anterior or posterior). In addition to the standard, straight abutment body, angled abutment bodies, produced with a 15 degree slope of one hemisphere to compensate for an undesirable path of insertion resulting from excessive implant angulation, are available.
Each ITI Straumann Tissue Level Synocta® Titanium Angled Abutment is packaged with a separate retaining screw (Inclusive Titanium Screw) compatible with the restorative instrumentation of the specified implant system.
The following conditions would contraindicate use of Inclusive Titanium Esthetic Abutments: (a) wall thickness less than 0.5 mm; (b) gingival margin diameter less than 0.5 mm wider than the implant; (c) angle corrections of more than 20 degrees; (d) less than 0.5 mm margin height; (e) less than 4.0 mm abutment height.
Angled abutments should not be used to restore small-diameter implants (less than or equal to 3.0 mm) in the posterior region.
ITI Straumann Tissue Level Synocta® Titanium Angled Abutment are packaged NON-STERILE. Prior to use in the oral environment, they should be cleaned, disinfected, and sterilized firstly.